Figure 19 - Update Fields; Figure 20 - Enter Ip A - Geokon 8800-2-1A Instruction Manual

6) Update the "IP Address", "Netmask", "Gateway", and "DNS Server 1" fields to
match your network. (Note: Do not make any other changes to the settings as it may
affect proper communications to the GeoNet Network Supervisor.)
7) Click OK.
8) Restart your MOXA Converter.
9) Connect the add on Module to the GeoNet supervisor.
10) Enter the new IP address followed by ":4001" as the "Network Address" in the Agent
Software program.
Figure 20 – Enter IP Address followed by ":4001"
Figure 19 – Update Fields
19