Table of Contents
Advertisement
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
_ atten rSRRKTerRr IR ENNNOON
somata:
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
_ooeanenonnsiene
ea snesocemac SONS
aN
ENE NAN
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
sores: if you have not done so, refer to pages 18 and 19,
nae
eaten
RENARD
ovens
opens
NtaRNN
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result!
The VCR is switched on automatically.
4 — Select:
+
The station to be recorded using the PROG/TRK (A or ¥)/
PROG (A or ¥) buttons
or
The LINE IN 4 or: EINE IN 2:%(S' 665B/665X/2658 'oniy)
source using the INPUT button for a satellite tuner or external
video source
Besult:
The station number is displayed and the programme
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (See pate 22).
6 — Hold REC down for a while to start recording.
Result:
The record indicator appears on the television and VCR
display. An index is recorded on the tape (see page 36).
7 — Tostop recording, press ml once.
tata
>
@ If the cassette is ejected when you start recording,
check that the safety tab is intact or the opening is
covered with adhesive tape.
@ Ifyou reach the end of the tape while recording, the
cassette rewinds automatically.
Advertisement
Table of Contents
