Scl Export; Com 610 Gateway - ABB COM 610 *2.1 User Manual

Communication gateway

Table of Contents

1MRS755385

2.4.

2.5.

Communication Gateway

User's Guide

SCL Export

It is possible to export the configuration files of the COM 610 OPC Servers and

Clients in SCL format using SCL Export function in the Gateway object.

Right-click the Gateway object and select SCL Export. This opens a tool where you

can export all configurations or select a certain OPC Server or Client configuration

to be exported as a SCL file. This function can be used to transfer the configuration

information to other systems and tools.

COM 610 Gateway consists of OPC Data Access (DA) server and client

components. OPC Servers are used mainly for master/client protocol stacks to

provide access to the data in the devices connected with the protocol. OPC Clients

are used for slave/server protocol stacks to enable external systems to access data

available in the OPC Servers.

Slave Protocol X

IEC61850 Data Model

OPC DA Client

OPC DA Server

IEC61850 Data Model

Master Protocol A

Fig. 2.5.-1 Example of COM 610 Gateway components

Available protocols

Protocols that are supported for the time being in COM 610 Gateway are shown in

a table below. The number of supported protocols will increase as the new protocols

come to the market. The master protocols are used in process communication and

the slave protocols are used in upper level communication.

information on those protocols refer to use's guides listed on Section 1.8.