Building Communication Structure; Opc Servers - ABB COM 610 *2.1 User Manual

1MRS755385
4.3.1.
4.3.1.1.
Communication Gateway
User's Guide
Fig. 4.3.-1 Example view of COM 610 Communication Engineering Tool
The engineering work can be divided into three tasks:
1. Building the object tree and configuring the object properties for OPC servers
2. Building the object tree and configuring the object properties for OPC clients
3. Exporting the configuration data.
First, you need to build an object tree. This is done by adding objects to the object
tree, for more information refer to the respective user's guide listed on Section 1.8.
Related documents. Connectivity packages for certain protection and control
products usually contain preconfigurations and tools to facilitate the building of the
object tree.

Building communication structure

Start the engineering from the server objects. Before an OPC client can be taken into
use, an OPC server has to be configured for the process communication.

OPC servers

The object tree is built in the Communication structure. There are several possible
ways to build an object tree in the Communication structure. One of them is to build
the object tree by adding objects in logical order starting from the OPC server object.
COM 610 *2.1
IECCETMain
39