Incoming and outgoing RS485 cable shield wires should be connected together, but must not be connected to the System-10. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com System-10-N2 BTU Meter Installation and Operation Guide 09/15 - 0655-6 / 18322...
SYSTEM-10 BTU METER N2 BOARD with Auxiliary Input Pulse 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com System-10-N2 BTU Meter Installation and Operation Guide 09/15 - 0655-6 / 18322...
Page 22
Device Address Program Enable Serial Comm 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com System-10-N2 BTU Meter Installation and Operation Guide 09/15 - 0655-6 / 18322 Page...
Page 23
Incoming and outgoing RS485 cable shield wires should be connected together, but must not be connected to the System-10. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com System-10-N2 BTU Meter Installation and Operation Guide 09/15 - 0655-6 / 18322...
Need help?
Do you have a question about the System-10 and is the answer not in the manual?
Questions and answers