Technical Data; Mounting - Window Master MotorController WCC 310 Installation Instructions Manual

Technical data

5
Output current (nominal)
Secondary voltage
AUX
Motor lines
Primary voltage
Power consumption
Inrush current on primary site
±24V change over time
LED message OK and fault
Connection cable
Operating conditions
Max actuator activation duration (duty
cycle)
Number of motor lines
Material
Colour
Size
Weight
Protection class
Delivery
Note

Mounting

6
The MotorController is fixed to the wall through the Ø6mm holes in the back plane
of the housing.
The MotorController is to be located in a safe place, protected from the effects of fire
and smoke.
With reference to the machinery directive EN 60204-1, the MotorController has to be
placed where it is only accessible to authorized persons and mounted where there is
no particular regard for dust and moisture.
Technical data
WCC 310: 10A / WCC 320: 20A
Voltage
Open circuit voltage (no load)
Ripple at max load
24V DC, 0.23A
WCC 310 0410: max 4, WCC 320 0810: max 8
a line can be either ±24V standard motor line or MotorLink
230V AC, 50Hz (85-264V AC, 47-63Hz)
Idle consumption:
1
WCC 310: min 1,1W , typ. 3W
1
WCC 320: min 1,1W , typ. 3,5W
1) min.: 1 actuator
®
2) typ.: 16 MotorLink actuators + rain sensor
®
3) typ.: 32 MotorLink actuators + rain sensor
Max:
WCC 310: At max load 305W
WCC 320: At max load 605W
70A<5ms. Max 3 x WCC 310/320 per 10 A supply group.
Circuit breaker "C" characteristic.
min 500ms
Green (flickering)
Yellow
Actuators
Other components
-5°C - +45°C, for indoor installation, the MotorController may not be covered
ED 40% (4min. per 10min.)
WCC 310: 4 x 10A motor line for ±24V standard or MotorLink
WCC 320: 8 x 10A motor line for ±24V standard or MotorLink
Metal housing for surface mounting
White (RAL 9010)
355 x 320 x 76 mm (WxHxD)
WCC 310: 4kg
WCC 320: 4.8kg
IP 20
MotorController
We reserve the right to make technical changes
24V DC (±15%)
27.6V DC @ 20°C
max. 6% (3.5Vpp)
2
3
CPU working
fault
flexible max 6 mm² / solide max 10 mm²
min 0,2mm² / max 1,5mm²
®
motor lines
®
motors
®
motors
7