Hazards; Personal Safety Equipment - Bushranger MT2601 Operator's Manual

SAFETY & HANDLING
Transporting and Storage
• Hand carry the unit with the engine stopped and the muffler away from your body.
• Allow the engine to cool, empty the fuel tank and secure the unit before storing or transporting in a vehicle.
• Empty the fuel tank after each use and before storing the unit.
• Store the unit and fuel well away from sparks or open flames from water heaters, electric motors, switches or furnaces,
etc.
• Store the unit out of reach of children and unauthorised persons.

Hazards

The following safety precautions must be strictly observed to avoid the risk of damage or personal injury.
Prior to using the unit, clear the operating area of objects which may be thrown up by
the cutting head, such as rocks, glass and other debris.
Do not start or operate the unit inside a closed room or building.
Breathing exhaust fumes can kill.
Be careful when operating the unit on slippery ground or overgrown terrain. Be
attentive for concealed hazards, such as ditches, tree stumps and roots.
Maintain solid footing and balance while operating the unit. Cut only on ground level.
Never use the unit without the guard securely in place.
Do not touch the cutting head in motion. When handling blade for assembly or
maintenance tasks, always wear protective gloves.
Bystanders must be at least 15 metres away during operation of the unit, as rocks and
other materials may be thrown at high velocities. Switch the unit off immediately if
approached.
Keep body away from hot muffler parts.

Personal Safety Equipment

Always use the following safety equipment when working with your Multi-Tool:
• A safety helmet fitted with a visor or suitable eye protection.
• A set of ear muffs.
• A pair of protective gloves.
• A pair of safety boots.
6