Advertisement
Quick Links
Advertisement
Related Manuals for Bushranger 85003
Summary of Contents for Bushranger 85003
- Page 1 OPERATOR’S MANUAL MULTI-TOOL HEDGE TRIMMER ATTACHMENT 85003...
- Page 2 IMPORTANT NOTES Thank you for purchasing your Bushranger Multi-Tool Hedge Trimmer Attachment. ® This instruction manual will aid in the assembly, safe operation and maintenance of your Multi-Tool Hedge Trimmer Attachment. Please read the following warnings to ensure safety and the long life of your product.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Safety & Handling Safety Instructions 04 - 06 Hazards Personal Safety Equipment Features & Definitions Feature Definitions Assembly Procedures Split Shaft Assembly Connection Of Attachment... -
Page 4: Safety Instructions
SAFETY & HANDLING Safety Instructions Do not operate the Multi-Tool Hedge Trimmer Attachment before reading all Instructions & reading all Safety & Handling sections. Operator Safety • Wear the necessary safety equipment, as listed on page (6), in the Personal Safety Equipment Section. •... - Page 5 SAFETY & HANDLING Fuel Safety Continued • Move at least 3 metres away from the fuelling site before starting the engine. • Wipe all traces of fuel on the unit before starting the engine. • Change your clothes before starting the unit if fuel has been spilt on them. Starting Safety •...
-
Page 6: Hazards
SAFETY & HANDLING Transporting and Storage • Hand carry the unit with the engine stopped and the muffler away from your body. • Allow the engine to cool, empty the fuel tank and secure the unit before storing or transporting in a vehicle. •... -
Page 7: Feature Definitions
FEATURES & DEFINITIONS Hedge Trimmer Attachment Cutting Blades Blade Support Gearbox Angle Adjustment Of The Gearbox Grease Lubrication Point ASSEMBLY PROCEDURES Attaching Hedge Trimmer Attachment / Adjusting Angle Fig. 6 Fig. 4 Fig. 5 Fig. 3 Once attachment is located in Pull locating pin (2) Loosen Knob (1) the drive release locating pin... -
Page 8: Connection Of Attachment
ASSEMBLY PROCEDURES Trimmer Body & Hedge Trimmer Attachment Gear Case • The reduction gears are lubricated by multipurpose, lithium-based grease in th gear case. Supply new grease every 20 hours of use or more often depending on job condition. • Remove the cutter holders before installing new grease to arrange for old grease to exit. Fig. - Page 9 NOTES...
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 Copyright © Roy Gripske and Sons Pty. Ltd. 2018. All rights reserved. 939. Images are for illustrative purposes only. Bushranger™ is a trademark of Roy Gripske & Sons Pty Ltd. PLP shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from furnishing this material.