Ip54 Kit Installation; Product Kit Contents - Cisco IR829 Hardware Installation Manual

IP54 Kit Installation

This chapter describes how to install the IP54 kit on the Cisco IR829 Integrated Services Router (ISR).
•
IP54 Kit Installation
This chapter describes how to install the IP54 kit on the Cisco IR829 Integrated Services Router (ISR).
The following are the features of this enclosure:
• Provides dust and water protection.
• Discourages tampering
The chapter contains the following sections:

Product Kit Contents

The IP54 kit contains the following items:
• Top Cover
• Bottom Cover
• 4 Short Screws
• 2 Long screws
• 2 Foam Plugs
Tools You Need
• #2 Phillips head screwdriver
Note: For compliance and safety information, see
800 Series Routers.
What to do before installing the IP54 Kit
Before you begin, make sure that you have followed all of the standard installation steps that are previously
explained.
IP54 Kit Installation, on page 61
Cisco IR829 Industrial Integrated Services Router Hardware Installation Guide
6
C H A P T E R
Regulatory Compliance and Safety Information for Cisco
61