Cisco IR829 Hardware Installation Manual page 8

Preface
Safety Warnings
WARNING: When installing the product, please use the provided or designated connection cables/power
cables/AC adapters. Using any other cables/adapters could cause a malfunction or a fire. Electrical Appliance
and Material Safety Law prohibits the use of UL-certified cables (that have the "UL" shown on the code) for
any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical
Appliance and Material Safety Law (that have "PSE" shown on the code) is not limited to CISCO-designated
products. Statement 371
WARNING: Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage
to the system. Statement 378
WARNING: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV
circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement
1021
WARNING: T his equipment must be grounded. Never defeat the ground conductor or operate the equipment
in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available . Statement 1024
Cisco IR829 Industrial Integrated Services Router Hardware Installation Guide
6