Test Run - Sl008 - Kohler KD83V16 Operation And Maintenance Manual

Operation and Maintenance Manual
Fig. 55: Replacing tensioning device
1 Nut (M10)
2 Tensioning device
Tensioning device removal
u Remove screw (M10) 4 with washer 3 and nut (M10) 1.
u Remove tensioning device 2.
Tensioning device installation
u Mount tensioning device with screw (M10) 4, washer 2 and nut (M10) 1.
u Tighten screw (M10) 4 and nut (M10) 1 to 40 Nm.
Information
Mount the battery charging alternator cover in reverse sequence.
5.6.3 Removal of the battery charging alternator cover, page 95)
5.6.7 Test run — SL008
See the generator set manual for more details.
KD83V16 33521030601_0_1 EN_US
2018-07
3
4
© 2018 by Kohler Co. All rights reserved.
Daily or monthly maintenance activities
Washer
Screw (M10)
(For more information see:
.
Maintenance
99