Kohler KD83V16 Operation And Maintenance Manual page 126

Maintenance
Lubricants and operating fluids
Quality categories performances
Oil category
Oil category 1
Oil category 2
Oil category
2.1
Oil category 3
(standard
today)
Oil category
3.1 (standard
today)
Tab. 31: Quality categories performances according oil categories
Lube Oil Category 3 minimum requirements
Parameter
Visual appearance
Viscosity at min. Temp.
Viscosity at operation
temp.
VI-Index
Height Temp. High
Shear
Ignition point
Total base number
Shear stability
NOACK (1h at 250°C)
Ash (Sulphur) max.
Tab. 32: Oil category 3 characteristic requirements
126
Minimum stand- Recommended
ards viscosity
classes
Not allowed
ACEA E4 or ACEA SAE 5W-40; SAE
E7 or API CI-4 Plus 10W-40; SAE
or DHD-1 or JASO 15W-40 with
DH-1 coolant
preheating
system
ACEA E6 or ACEA SAE 5W-40; SAE
E9 or API CJ-4 or 10W-40; SAE
JASO DH-2 15W-40 with
coolant
preheating
system
ACEA E4-16 or both SAE 5W-40; SAE
ACEA E4 and ACEA 10W-40
E7
ACEA E6-12 or both SAE 5W-40; SAE
ACEA E6 and ACEA 10W-40
E9 or API CK-4
Unit Value Engine oil
without exhaust
after treatment
clear
mm2/s 3500
mm2/s 10.0 - 16,0
> 145
cP 3.5 - 4.3
°C > 220
mg KOH/g > 12
% 10%
% max. 10 %
g/100g 1.9
© 2018 by Kohler Co. All rights reserved.
Operation and Maintenance Manual
Base oil. All have to
be compliant to high
power turbo charged
engines
Synthetic (Group 2
and/or 3 Base oils)
Synthetic (Group 2
and/or 3 Base oils)
Synthetic (Group 3
and/or 4), VI > 155,
and long live additives
Synthetic, VI > 155,
and long live additive
Value Engine oil
with exhaust after
treatment
clear
3500
10.0 - 16,0
> 155
3.5 - 4.3
> 220
> 9
10%
max. 10 %
0.95
KD83V16 33521030601_0_1 EN_US
Base oil. All
have to be
compliant to
high power
turbo
charged
engines
1
1
2
2
Method
Visual
DIN 51562
DIN 51562
i.A. DIN ISO 2909
CEC L-36-A-90
DIN ISO 2592
DIN ISO 3771
ASTM D6278
CEC-L-040-93
DIN 51575
2018-07