Download  Print this page

Panduit CJ6X88TG Series Installation Instructions

10gig utp jack modules.
Hide thumbs
   

Advertisement

© Panduit Corp. 2016
Jack
3
CWST
6
0.5"
(12.7mm)
10
For Technical Support: www.panduit.com/resources/install_maintain.asp
** Denotes color.
Part Numbers: CJ6X88TG**, CJK6X88TG**, CJQ6X88TG**, CJH6X88TG**
INSTALLATION INSTRUCTIONS
Strain relief
collar
Wire cap
4
7
Do not pre-arrange
conductors.
(OR)
TX6A 10Gig UTP Jack Modules
1
NOTE: Use setting 9 of CJAST tool.
Turn 2 times to cut through the
outer jacket and MaTriX tape only.
CJAST
8
11
Page 1 of 2
2
5
9
EGJT
PN511F
MaTriX
tape

Advertisement

Table of Contents

   Related Manuals for Panduit CJ6X88TG Series

   Summary of Contents for Panduit CJ6X88TG Series

  • Page 1 TX6A 10Gig UTP Jack Modules Part Numbers: CJ6X88TG**, CJK6X88TG**, CJQ6X88TG**, CJH6X88TG** INSTALLATION INSTRUCTIONS PN511F © Panduit Corp. 2016 NOTE: Use setting 9 of CJAST tool. MaTriX Strain relief Turn 2 times to cut through the collar tape outer jacket and MaTriX tape only.
  • Page 2 2. Jack modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter. 3. Jack modules may be re-terminated a minimum of 20 times. 4. For technical and performance information, consult Panduit technical support. As with all Wiring Accessories, the following statements apply: 1.
  • Page 3 Cable Prep for non-MaTriX Category 6A Cable CWST Continue with steps 8-15 on pages 1 and 2 to complete termination.

This manual is also suitable for:

Tx6aCjk6x88tg seriesCjq6x88tg seriesCjh6x88tg series

Comments to this Manuals

Symbols: 0
Latest comments: