Raisecom RC852-30-FV35 User Manual page 8

RC852-30-FV35-S3
RC852-30-FV35-SS13
RC852-30-FV35-SS15
RC852-30-FV35-SS23
RC852-30-FV35-SS25
When connecting with other fiber optical modem, it is required to comply with the specific connecting requirements
according to the following table. Otherwise, link faults or abnormal data transmission will occur.
Module, V.35 to fiber optical modem, one V.35 DCE port (HDB26 female
connector), one fiber port ( dual-strand, SC/PC, single mode, 15~120Km)
Module, V.35 to fiber optical modem, one V.35 DCE port (HDB26 female
connector), one fiber port (single-strand, TX1310nm/RX1550nm, SC/PC, single
mode, 0~25Km)
Module, V.35 to fiber optical modem, one V.35 DCE port (HDB26 female
connector), one fiber port (single-strand, TX1550nm/RX1310nm, SC/PC, single
mode, 0~25Km)
Module, V.35 to fiber optical modem, one V.35 DCE port (HDB26 female
connector), one fiber port (single-strand, TX1310nm/RX1550nm, SC/PC, single
mode, 10~50Km)
Module, V.35 to fiber optical modem, one V.35 DCE port (HDB26 female
connector), one fiber port (single-strand, TX1550nm/RX1310nm, SC/PC, single
mode, 10~50Km)
Host site
RC852-30-FV35-S1
RC852-30-FV35-S2
RC852-30(-BL)-S3
RC852-30(-BL)-SS13
RC852-30(-BL)-SS15
RC852-30(-BL)-SS23
Remote Site
*RC852-30-FV35-S1
*RC851-30-FV35-S1
*RC852-30-FV35-S2
*RC851-30-FV35-S2
RC852-30(-BL)-S3
*RC852-FV35-30-S3
*RC851-FV35-30-S3
RC852-30(-BL)-SS15
*RC852-30-FV35-SS15
*RC851-30-FV35-SS15
RC852-30(-BL)-SS13
*RC852-30-FV35-SS13
*RC851-30-FV35-SS13
RC852-30(-BL)-SS25
*RC852-30-FV35-SS25
*RC851-30-FV35-SS25
- 8 -