Do you have a question about the TMILL-360-BK-R01 and is the answer not in the manual?
Questions and answers
Anne Obriena
May 31, 2025
There is no power going to the unit even when the power button is on and lit at the bottom front of machine
1 comments:
Mr. Anderson
May 31, 2025
A possible cause of no power to the Everfit TMILL-360-BK-R01 treadmill, even when the power button is lit, could be a loose or worn electrical cable or plug. The manual advises not to use the treadmill in such cases and to have a qualified electrician inspect the issue.
Page 2
Think safety first with these helpful tips. Keep children away Always keep young children away from your treadmill when you have it plugged in. Contact with the moving belt can cause serious friction burns to children. Know the safety features Read all the operating and safety instructions.
Warning & Safety Information 1. Ensure that you read the manual carefully before attempting to assemble or use Power Electric Treadmill. 2. The Power Electric Treadmill must be positioned on a firm flat surface. 3. The Power Electric Treadmill is designed for indoor use only. It is not to be used outdoors. 4.
Parts List Control Panel Locking Pin Emergency Stop Magnet Heartbeat Sensor Running Belt Locking Pin Toe Cap Technical Specifications Product Name TMILL-360-BK-R01 Voltage Rate 220-240V Rated Frequency 50/60HZ Rated Power 1.0HP Maximum User Weight 120KG...
Page 5
Accessories M12x50 Locking pin(Lower) Screw Spring Bolt Red emergency stop magnet Handrail screw covers Toe Cap Hex Key M8 X 50 screws and gasket Big flat head screw Hex Key...
Assembly Instructions Remove the plas c from the Confidence Power Trac Treadmill. Moun ng the plas c Toe cap Align the plas c Toe cap with the screw hole, screw in place with accompanying M5x12 Screw with small gasket. Screw the nut and locking screw into the Position.
Page 7
Mounting the control panel Align the control panel with the screw hole, screwing in place with accompanying M6 screw. Mount the handrail on frame leg and tighten screw with accompanying Allen key, Fasten the Handrail decorative cover over the screws on the handrail Mount the modular contact in the outlet on the right frame leg.
Warm-Up Exercise Warm up exercise is important in preparing the muscles for activity whilst minimising the risk of injury. You may choose to warm up with a light/brisk walking pace for 5-10 minutes before stopping and performing some simple stretches. (As shown in the pictures below) 1.
Maintenance Instructions WARNING: Before cleaning or carrying out any maintenance on your treadmill, ensure the power is turned off and the power cord removed from the plug socket. At least once a year, the motor cover on your treadmill should be removed and any dust or debris vacuumed up to maintain the smooth operation of the motor and drive system.
Maintenance 1. Before moving or cleaning your Power Electric Treadmill unplug it from the main power supply. 2. Always clean the Power Electric Treadmill with a damp cloth avoiding the control panel. DO NOT USE ROUGH CLEANING AGENTS. 3. Clean the power switch and control panel with a soft dry cloth. DO NOT USE A WET CLOTH IN THESE AREAS.
Need help?
Do you have a question about the TMILL-360-BK-R01 and is the answer not in the manual?
Questions and answers
There is no power going to the unit even when the power button is on and lit at the bottom front of machine
A possible cause of no power to the Everfit TMILL-360-BK-R01 treadmill, even when the power button is lit, could be a loose or worn electrical cable or plug. The manual advises not to use the treadmill in such cases and to have a qualified electrician inspect the issue.
This answer is automatically generated