Table of Contents
Advertisement
IonPac CS14 Manual
Read the system manuals. This manual assumes that you are familiar with the installation and operation of the Dionex Ion
Chromatograph (IC). If you do not understand the operation of the system, take the time to familiarize yourself with the
various system components before beginning an analysis.
You may need to make a liquid line fitting. The IonPac CS14 Analytical Column and the IonPac CG14 Guard Column have 10-
32 PEEK end fittings for use with ferrule/bolt liquid line fittings. If you have an Ion Chromatograph with Tefzel
having 1/4-28 ThermoFlare™ fittings, it will be necessary to obtain one or more Tefzel liquid lines with a PEEK bolt and ferrule
fitting on one end and a 1/4-28 ThermoFlare fitting on the other end. See, "Dionex Liquid Line Fittings," for detailed
instructions on purchasing or making these lines.
Always remember that assistance is available for any problem that may be encountered during the shipment or
operation of Dionex instrumentation and columns through the Dionex North America Technical Call Center at 1-
800-DIONEX-0 (1-800-346-6390) or through any of the Dionex Offices listed in, "Dionex Worldwide Offices."
Doc. No. 034848-10
Page 6 of 54
®
liquid lines
Advertisement
Table of Contents
