Motor - SATO WS408TT Service Manual

4.5

Motor

1. Separate the whole printer module with main
board and disconnect the cable which is
marked in orange.(Figure E-1)
2. Using screwdriver to loosen 3 screws which
are marked in orange. (Figure E-2)
3. Then we can take the motor out as shown in
Figure E-3.
Warning:
Always turn off printer power before removal.
Caution:

When disconnect the power cord, please wait
10 seconds after removing any connectors
from the printer.

Wait for the motor temperature to cool.
E-1
E-2
15