Drive Motor Replacement - SATO D508 Service Manual

DRIVE MOTOR REPLACEMENT

1 Turn the printer OFF and disconnect the power supply cord.
2 Remove the base cover from the housing cover to access the drive motor.
3 Remove the five screws (1) (See Figure 4-10a) that secure the main circuit board (2) to the
printer (3).
4 Disconnect all wiring harnesses from the defective main circuit board (2).
5 Remove the circuit board (2), along with the interface cover (4), from the printer (3), and set
it aside.
6 Remove the two screws (5) that secure the drive train (6) to the printer (3).
7 Remove the drive train (6) from the printer (3) and disconnect the motor's wiring harness.
2
Page 4-14
1
6
3
Figure 4-10a, Drive Motor Replacement
5
SATO D508/D512 Service Manual
4