Other Image Settings - Panasonic KX-HNB700 User Manual

Hide thumbs Also See for KX-HNB700:
Table of Contents

Advertisement

1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 60).
3
Tap [Set Thumbnail].
4
Tap
.
R A still image is displayed.
5
Tap [Save].

Other image settings

Displaying images upside down
You can display the camera image upside down.
1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 60).
3
Tap [Settings] ® [Video Settings] ® [Other Settings].
4
Tap [Upside Down].
5
Tap
.
Adjusting the time stamp
You can change the time format and position of the time stamp that is displayed when viewing camera
images or recording. You can also turn the time stamp off.
1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 60).
3
Tap [Settings] ® [Video Settings] ® [Other Settings].
4
Tap [Time Stamp].
5
Select the desired setting and then tap [OK].
– [Position]: Determines the position of the time stamp. To turn the time stamp off, select [OFF].
– [24-Hour Format]: Determines whether the time stamp is displayed in 24-hour format or 12-hour
format.
Note:
R To adjust the camera's date and time setting, see "HD camera device profiles", Page 79.
Confirming the bit rate
While viewing camera images, the camera can display an icon that corresponds to the current bit rate.
Bit rate is a measure of how much data is being transmitted; if bit rate decreases when viewing camera
images, image quality may also be reduced. Bit rate may vary depending on network conditions, however
if it is consistently low, confirm the network conditions (network traffic, camera and wireless router
placement or obstacles, etc.) for possible causes.
1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 60).
3
Tap [Settings] ® [Video Settings] ® [Other Settings].
4
Slide the [Bit Rate Level Icon] switch to the desired position.
R When the switch is turned on, bit rate is displayed while viewing HD camera images as follows.
Using an HD camera
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents