System Expansion; System Expansion (Overview); Registering Devices - Panasonic KX-HNB700 User Manual

Using the app
HD camera LED indicator
Off
Blue
White
Green
Red
*1 You can configure the camera so that its LED indicator does not light during normal operation or
when motion is detected. See "HD camera device profiles", Page 79.

System expansion

System expansion (overview)

You can expand the system by registering additional devices to the access point.
Maximum number of mobile devices
Maximum number of front door cameras
and outdoor cameras

Registering devices

If you purchased any devices separately from the access point, you must register them to the access
point before you can use them. You can also register additional access points.
Note:
R To register a mobile device, use the procedure described in "Registering other mobile devices to the
access point", Page 15.
24
Charging
Charging failure
No power, or LED indicator is turned off
Normal operation, connected to wireless router
Normal operation, connected to wireless router
Camera is searching for wireless router
Initial setup required
Initial setup is in progress with mobile device connected
Initial setup is starting
*1
Motion detected , or camera is starting up
Live images are being viewed or recorded, or camera is starting up
Device malfunction
*1
8
16
*1
, privacy shutter is open
*1
, privacy shutter is closed