Status Led; Updating Firmware; Resetting Camera Settings - Panasonic KX-HNB700 User Manual

1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Name].
4
Enter the desired name.
5
When finished, tap [OK].
Note:
R You can also change these settings by tapping
camera image screen ( "Viewing the live camera image screen", Page 44).

Status LED

You can determine whether the camera's LED indicator lights or is disabled.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [System].
4
Slide the [Status LED] switch to the desired position.
Note:
R You can also change these settings by tapping
camera image screen ( "Viewing the live camera image screen", Page 44).

Updating firmware

You can use this feature to check for a newer version of the camera firmware (i.e., system software). If a
newer version is found, you can update the firmware.
Important:
R Make sure to fully charge the camera before updating its firmware. The firmware may not be able to be
updated if the battery level is low.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [System] ® [Firmware Update].
R The camera will connect to the Internet and check for a newer version of its firmware.
4
Follow the on-screen instructions.
Note:
R You can also change these settings by tapping
camera image screen ( "Viewing the live camera image screen", Page 44).

Resetting camera settings

1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
Using a front door camera and outdoor camera
® [Settings].
displayed next to camera images in the live
® [Settings].
displayed next to camera images in the live
® [Settings].
displayed next to camera images in the live
® [Settings].
55