Linking With Your Google Home - Panasonic KX-HNB700 User Manual

Using the app
R Feature availability may vary depending on the availability of third-party services. Panasonic cannot be
held responsible for the availability and functionality of third-party services.

Linking with your Google Home

You must do the following in order to link the access point with your Google Home.
– Create a Panasonic ID for logging in to the Panasonic server ( "Creating a Panasonic ID", Page 34)
– Log in to the Panasonic server and configure your Google Home to link with the access point
( "Logging in to the Panasonic server and linking with your Google Home", Page 34)
Note:
R This feature requires third-party equipment and services.
R Confirm the following before you begin.
– Make sure your Google Home can connect to the Internet.
– Make sure you have installed the Google Home app on your mobile device.
Creating a Panasonic ID
A Panasonic ID is required to log in to the Panasonic server.
1
From the [HomeHawk] app home screen, tap
2
Tap [Google Home].
3
Select the desired access point.
R An agreement may be displayed. If displayed, tap [Accept] to proceed.
4
Tap [Create].
R A browser is opened. Follow the on-screen prompts to create a Panasonic ID.
Logging in to the Panasonic server and linking with your Google Home
If you have a Panasonic ID you can log in to the Panasonic server and then configure your Google Home
to link with the access point.
1
From the [HomeHawk] app home screen, tap
2
Tap [Google Home].
3
Select the desired access point.
R An agreement may be displayed. If displayed, tap [Accept] to proceed.
4
Enter your Panasonic ID and password and then tap [Login].
5
Using your Google Home app, search for the "Panasonic HomeHawk" service. Enter your Panasonic
ID in the displayed screen and enable the access point.
R For details about these settings, refer to the operating instructions and support information
provided for your Google Home.
Changing your Panasonic ID
1
From the [HomeHawk] app home screen, tap
2
Tap [Google Home].
3
Select the desired access point.
4
Tap [Unlink from Google Home] ® [OK], and follow the steps in "Logging in to the Panasonic
server and linking with your Google Home", Page 34 to log in using the new Panasonic ID.
34
® [Settings].
® [Settings].
® [Settings].