Table of Contents
Advertisement
8 Configure the settings relating to images and audio [Image/Audio]
8.5 Configure the settings relating to image position
[Image/Position]
Click the [Image/Position] tab on the "Image/Audio" page. (®page 32, page 34)
When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a
newly opened window. The detailed settings can be configured while monitoring images displayed on the
[Image/Position] tab.
The settings relating to image adjust, preset position, auto pan, patrol, auto track, direction/angle, privacy zone,
and VIQS can be configured in this section.
Note
•
Each setting for [Image/Position] cannot be configured while the washer is operating. Configure [Image/
Position] settings after the washer has finished operating.
[Image adjust]
Click the [Setup>>] button to display the setup menu that can configure the settings relating to image quality.
The setup menu will be displayed in a newly opened window. (®page 59)
[Preset position]
Click the [Setup>>] button to display the setup menu that can configure the preset position. The setup menu
will be displayed in a newly opened window. (®page 71)
[Auto pan]
Click the [Setup>>] button to display the setup menu that can configure the settings relating to the auto pan
function. The setup menu will be displayed in a newly opened window. (®page 75)
[Patrol]
Click the [Setup>>] button to display the setup menu that can configure the settings relating to the patrol
function. The setup menu will be displayed in a newly opened window. (®page 76)
58
Operating Instructions
Advertisement
Table of Contents
