Changing The Name Of Cameras; Status Led - Panasonic HomeHawk KX-HNC500 User Manual

1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Video].
4
Slide the [Bit Rate Level Icon] switch to the desired position.
R When the switch is turned on, the bit rate is displayed while viewing camera images as follows.
Highest bit rate
High bit rate
Moderate bit rate
Lowest bit rate
Displaying images upside down (shelf cameras only)
You can display the camera image upside down.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Video].
4
Slide the [Upside Down] switch to the desired position.

Changing the name of cameras

You can edit camera names.
The camera name setting is used to identify cameras. This is useful when you have multiple cameras.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Name].
4
Enter the desired name.
5
When finished, tap [OK].
Note:
R If your camera is linked with an Amazon Echo Show device or a Google Home device and the Amazon
Echo Show device or Google Home device does not recognize the camera name, try changing the
camera name.

Status LED

You can determine whether the camera's LED indicator lights or is disabled.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Slide the [Status LED] switch to the desired position.
Using a shelf, floor, and window camera
® [Settings].
® [Settings].
® [Settings].
® [Settings].
113