Pulsarlube OL500 User Manual

Available Mounting Options

Single Point Lubrication
Oil Brush & Bracket Assembly
Plastic Stainless Steel
Do not use Teflon tape on parts connected to oil distributor.

Shelf Life and Product Warranty

The shelf life of each Pulsarlube OL500 unit is 1 year from the date of production.
Product warranty is limited to original defects in material and workmanship and will not
cover any collateral damage due to mishandling, abuse and /or any other inappropriate
use of this product. Warranty period is 1 year from the date of purchase.
Pulsarlube USA, Inc.
1480 Howard Street, Elk Grove Village, IL 60007, USA
TEL: 1-847-593-5300 FAX: 1-847-593-5303
Multi Point Lubrication (Up to 4 Points)
Multi Point / Remote Installation Kit
How to Order
OL500
(Pulsarlube OL500: 500ml Capacity)
www.pulsarlube.com / info@pulsarlube.com
Doc No. 1072-000 REV. 140203
USER MANUAL
Models
PULSARLUBE OL500, 500ml Oil Lubricator

Before Use

Thank you for purchasing the Pulsarlube OL500. The Pulsarlube OL500 is designed to deliver a fresh, consistent, and precise
amount of lubricating oil to the vital parts of your rotating equipment. To ensure the safe operation and proper installation of the
Pulsarlube OL500 unit, we strongly recommend that you read the following information carefully before use.
If you require further information, please contact your local supplier or manufacturer.

Product Details

Hand Knob
Oil Reservoir
Lid
Buttons
Check Valve
Oil Absorbor
LCD
Main Body
Buttons
Connecting Thread
3/8" BSPT
Refillable Automatic Oil Lubricator

Specifications

Specifications Description
Capacity 500ml (refillable)
Operating Pressure Avg. 10kgf/ (145psi) (depending on oil viscosity)
-15˚C ~ 60˚C (5˚F ~ 140˚F)
Operating Temperature -40˚C ~ 60˚C (-40˚F ~ 140˚F) *
* with optional Lithium Battery Pack
Oil Viscosity Range 10 ~ 10,000 cSt @ 40°C
Product Size Ø94mm (3.7") × 230mm (9")
Weight 0.8kg (1.76 lbs) (excluding the weight of oil)
Available Dispensing Periods Half (H), 1, 2, 4, 6, 12, 18 & 24 months
Installation Thread Size 3/8" Male BSPT
Multi Point Up to 4 points
Remote Installation Available using a 4mm O.D. Nylon tube
Technical information is subject to change without notice.
/
LCD Display - Function
The dispensing period setting
OIL
The # of days remaining until the
end of lube cycle
The unit is in"Automatic Lock Out"
mode
500
Oil reservoir capacity
The test mode is activated
Select the dispensing rate in
The # of days after dispensing
ascending order: 1▶2 ▶ 4 ▶ 6 ▶
has completed
12 ▶ 18 ▶ 24 ▶Half (H)
The # of days on stand-by mode
Deactivate "Automatic Lock Out"by
due to excessive backpressure
pressing the MODE/LOCK button
until the lock icon ( ) disappears
Low battery power
Press the POWER button for 2
seconds to turn unit on or off
Excessive backpressure exists
Empty oil level
Test function prior to installation
Signal lamp blinks periodically
Reset the unit when the unit
when battery power is low, excessive
malfunctions and/or after changing
backpressure exists, or if oil level is
the battery pack empty