Printing A Network Status Sheet - Epson ET-4700 Series User Manual

User's Guide
Related Information
"Printing a Network Status Sheet" on page 41
&
"Connecting to a Computer" on page 21
&
Message on the Network Environment
Message
*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected. Confirm network
name (SSID).
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
The same SSID as Wi-Fi Direct exists in the
environment. Change the Wi-Fi Direct SSID
if you cannot connect a smart device to the
printer.

Printing a Network Status Sheet

You can check the detailed network information by printing it.
1. Load papers.
2. Select Settings on the home screen.
To select an item, use the
3. Select Network Settings > Print Status Sheet.
x
4. Press the button.
The network status sheet is printed.
Network Settings
Solution
The same SSID may be set on several wireless router. Check the settings on
the wireless router, and change the SSID.
After moving the printer closer to the wireless router and removing any
obstacles between them, turn off the wireless router. Wait for about 10
seconds, and then turn it on. If it still does not connect, see the
documentation supplied with the wireless router.
Computer and smart devices that can be connected simultaneously are
connected in full in the Wi-Fi Direct (Simple AP) connection. To add another
computer or smart device, disconnect one of the connected devices or
connect it to the other network first.
You can confirm the number of wireless devices which can be connected
simultaneously and the number of connected devices by checking the
network status sheet or the printer's control panel.
On the printer's control panel, go to Wi-Fi Direct Setup screen and select the
menu to change the setting. You can change the network name following
after DIRECT-XX-. Enter within 32 characters.
u d l r
buttons, and then press the OK button.
41