Multiple Switches - Binary B-900-MOIP-4K-CTRL Networking Manual

MoIP System Network Setups
Single switch MoIP network configurations are supported by Araknis 210 PoE and 310 PoE
Series switches. Integrators familiar with the above requirements and the configuration of
stackable and cascaded switches with multi-gigabit uplinks will be able to create very large
MoIP deployments.
Single Switch
Dedicated MoIP Switch (RECOMMENDED)
MoIP Transmitter
MoIP Receiver
MoIP Controller
Network
+5VDC
Shared MoIP Switch
MoIP Transmitter
MoIP Receiver
MoIP Controller
Network
+5VDC
MoIP on Main LAN Switch
MoIP Transmitter
MoIP Receiver
MoIP Controller
Network
+5VDC

Multiple Switches

Please refer to your network switch manufacturers' documentation to enable the critical
features for optimal performance in multiple switch MoIP network configurations.
Bandwidth considerations are critically important.
Transmitters which can be supported by a given network topology is limited by the lowest
bandwidth link in the network. Typically, this will be the link between switches. MoIP Receivers
Dedicated MoIP Switch
9 11 13 15
10 12 14 16
MoIP Switch
9 11 13 15
10 12 14 16
To other network device
Main LAN Switch
9 11 13 15
10 12 14 16
The maximum number of MoIP
5
Main LAN Switch
9 11 13 15
10 12 14 16
Main LAN Switch
9 11 13 15
10 12 14 16
To other network device