Texas Instruments TRF7970A Instruction Manual page 42

TRF7970A
SLOS743K – AUGUST 2011 – REVISED APRIL 2014
Figure 6-25. Continuous Read of FIFO After Inventory Command
At this point, it is good form to reset the FIFO and then read out the RSSI value of the tag. In this case the
transponder is very close to the antenna, so value of 0x7F is recovered.
42 Detailed Description
Figure 6-26. Reset FIFO and Read RSSI
Submit Documentation Feedback
Product Folder Links:
Copyright © 2011–2014, Texas Instruments Incorporated
TRF7970A
www.ti.com