13: Services Settings; Dns Settings; To View Or Configure Dns Settings; Table 13-1 Dns Settings - Lantronix xSenso 2100 User Manual

13: Services Settings

DNS Settings

This section describes the active run-time settings for the domain name system (DNS) protocol.
The primary and secondary DNS addresses come from the active interface. The static addresses
from the Network Interface configuration settings may be overridden by DHCP.
The blue text
Note:
a user-specified name.
Setting / Field
Lookup

To View or Configure DNS Settings:

Using Web Manager
To view DNS current status, go to the Admin tab/page and click DNS in the menu.

To lookup DNS name or IP address, go to the Admin tab/page and click DNS in the menu to

access the Lookup field.
To configure DNS for cases where it is not supplied by a protocol, go to the
Note:
Admin tab/page, click Network in the menu and select Interface -> Configuration.
Using the CLI
To enter the DNS command level: enable -> dns

Using XML
Include in your file:

xSenso 2100 User Guide
in the XML command strings of this chapter are to be replaced with

Table 13-1 DNS Settings

Description
Perform one of the following:
Enter an IP address, and perform a reverse Lookup to locate the hostname for

that IP address
Enter a hostname, and perform a forward Lookup to locate the corresponding IP

address
<configgroup name="interface" instance="eth0">
48