Table of Contents
Advertisement
8:
Reading
The xSenso 2100 Reading tab provides access to a live readings page of analog inputs 1 and 2.
This page is read-only, providing the following dynamic information for each input:
Input Value
Input Alarm High Value (if applicable)
Input Alarm Low Value (if applicable)
Input Maximum Value
Input Average Value
Input Minimum Value
Titles and units for this Reading page are configurable under
hide an input by disabling its display under analog input settings. Data is polled from xSenso
every second. Maximum, mininum and average values are calculated based on these data
samples. To reset the maximum, mininum and average values, simply refresh the webpage. An
input entering alarm zone will be blinking in red.
Data Reading Configuration
To View Data Reading Settings
Using Web Manager
To view live readings information, click the Reading tab to get to the Reading page.
xSenso 2100 User Guide
Note:
will be lost if you navigate away from this
page. Cumulative values are calculated
since the last time the page was opened.
Figure 8-1 Reading Tab/Page
Max, Min and Average input values
settings. You may also
Analog Input
39
Advertisement
Table of Contents
