Checking The Tester's Status - Fluke OF-500 OptiFiber User Manual

Checking the Tester's Status

The following steps help you verify that the tester is ready
for use.
Checking the Tester's Status
Check the battery status
Look at the battery icon in the lower-left corner of the
F
screen or press
A fully-charged battery lasts about 8 hours during typical
use.
Check the space available on the memory card
Insert the memory card you will use, press
select Memory Status.
To see the status of the internal memory, press
A
from the MEMORY STATUS screen.
; then select Battery Status.
F
To view or delete stored records, press
To format the memory card press
Format Memory Card.
Verify that the installed module can run the tests you
need
The module's model number is shown in the upper-right
corner of the screen.
; then
To review module capabilities, press H twice; then select
"modules" in the OptiFiber online help index.
Checking the Tester's Status
v
.
F
; then select
25