Changing The Connector Adapter - Fluke OF-500 OptiFiber User Manual

OF-500 OptiFiber Certifying OTDR
Users Manual

Changing the Connector Adapter

You can change the module's input connector adapter
(Figure 23) to connect to SC, ST, LC, and FC fiber connectors.
Additional adapter styles may be available. Check the Fluke
Networks web site for updates.
W
•
Cover all connectors with protective caps when
not in use.
•
Store extra connector adapters in the canisters
provided.
•
Do not touch the photodiode lens (see Figure
24).
•
Do not overtighten the adapter or use tools to
tighten the adapter.
58
Caution
To install a connector adapter, refer to Figure 24 and do the
following:
1 Locate the slot in the module connector and the key on
the adapter ring.
2 Holding the adapter so it does not turn in the nut,
align the adapter's key with the module connector's
slot and slide the adapter onto the connector.
3 Screw the nut onto the module connector.
Figure 23. SC, ST, LC, and FC Connector Adapters
amd37f.eps