Verifying Operation - Fluke OF-500 OptiFiber User Manual

Verifying Operation

Verifying Operation
The tester performs a basic self-test when you turn it on. If
the tester reports an error or does not turn on, refer to "If
Something Seems Wrong" on page 97.
The tester shows the model number of the installed module
in the upper-right corner of the screen. If the screen shows
No Module Installed, Problem with Module, or The module
needs a software update refer to "If Something Seems
Wrong" on page 97.
ajt56f.eps
Figure 2. Removing the Module
15