Table of Contents
Advertisement
ADSL2+ Tester
Time & Date
Clock Mode
Date
Time
Before uploading the stored results in the instrument or upgrading the embedded software
by TestManagerPro, user should configure the RS232 port firstly as described in Table 27.
RS232 Port
Port State
Caution:
Before communicating with PC, make sure to set the RS232 port as ON. When
the RS232 port state is configured as ON, other operations of the instrument
will be disabled. The displays will be locked temporarily before the port state
becomes OFF. Please disable the port state as
with PC is completed, to perform other operations.
"Keyboard Test" function can detect whether the keyboard of the instrument functions
properly or not. Except for the "Power" key, all other functional keys can be tested.
The keyboard test can be performed one by one according to the prompt information in
displays. In the process of keyboard test, all the functional keys including the "Power"
key are locked and only valid for use after the test.
72-0046-03A
Option
To run the new real-time clock after the modification of
RUN
the date and time.
To modify the date and time of the instrument.
SETUP
Year
To select between 2000~2099.
Month
To select elect between 01~12.
Day
To select elect between 01~31.
Hour
To select elect between 00~23.
Minute
To select elect between 00~59.
Second
To select elect between 00~59.
Table 26: "Time & Date" configurations
Option
The instrument can communicate with PC via the RS232
ON
interface.
The communication with PC via RS232 interface will be
OFF
prohibited.
Table 27: "RS232 Port" configurations
4 Navigating the Displays
Description
Description
OFF
when the communication
55
Advertisement
Table of Contents
