Xiaguang XP XG2045 Manual page 27

ADSL2+ Tester
S ett in g s
F unct ion
Li ne St a n d a r d
i
4.2.1 "Line Parameter" settings menu
Press "F1" in Fig 4 to select "Line Parameter" settings menu. In page 1, press "Cursor
Moveable Right and Down" key to move the cursor to the position of "Standard". And
then you can use "F1", "F2", "F3" and "F4" to choose the parameters, See Fig 5.
a. Page 1 of "Line Parameter" settings menu
In "Line Parameter" test mode, only the ADSL line standard should be set. And all the
configuration parameters of "Standard" are shown in Table 4.
Item Option
AUTO
ADSL2+
ADSL2
Standard ANSI T1.413
G.DMT
G.LITE
RE-ADSL
b. Page 2 of "Line Parameter" settings menu
Press "PgDn" key to go to Page 2, as shown in Fig 6. In Page 2, press "Cursor
Moveable Right and Down" key to move the cursor to the positions of "Down Data
Rate", "Down SNR Margin", "Down Capacity". And then you can use "F1", "F2", "F3"
and "F4" to choose the parameters.
72-0046-03A
P : 1 / 2
C on ne ct in g......
LI NE LI NE
PAR A M B ER T
Fig 4: "Settings" menu
Organization
——
ITU
ITU
ANSI
ITU
ITU
ITU
Table 4: "Standard" configuration descriptions
1 0 :3 0 : 00
[L IN E PA RAM ETER
[ AUTO ]
PIN G
> >
Description
Auto detect and set the standard
ITU-T G.992.5 Recommendation
ITU-T G.992.3 Recommendation
ANSI T1.413 Issue 2
ITU-T G.992.1 Recommendation
ITU-T G.992.2 Recommendation
Reach Extended ADSL (Annex L)
4 Navigating the Displays
]
27