Xiaguang XP XG2045 Manual page 46

ADSL2+ Tester
4.3.3 "PING" results menu
After "LAN PING" settings, connect the tester to the LAN, "LAN LINK/ACTIVE" LED is lit.
Or, after "WAN PING" settings, connect the tester to the ADSL line, "WAN LINK" LED is
lit. Press "Start/Stop" key and "Start/Stop" LED is lit green steady, then press "Result"
ke to switch to "Results" menu of "PING".
Press "F1", "F2", "F3" and "F4" to select the result information, as shown in Fig 23.
Re sult s
[R - TIM E ANA L Y SIS
Rep ly fr om 2 20 . 18 1 .2 8. 42
Byt es = 5 6 t ime s = 58. 0 m s TT L= 5 1
Rep ly fr om 2 20 . 18 1 .2 8. 42
Byt es = 5 6 t ime s = 58. 0 m s TT L= 5 1
i
R -TIME
Results menu of "PING" include "Real-time Analysis" and "Statistic Analysis". And
"Real-time Analysis" descriptions are shown in Table 17.
Result
Analysis
Real-time
Reply from 220.181.28.42
Analysis
Bytes=56 times=58.0ms TTL=51
"Statistic Analysis" descriptions are shown in Table 18.
Result Analysis
SENT
RECEIVED
LOST
LOST RATIO
4.3.4 "TRACE" results menu
After completing "TRACE" settings, press "Start/Stop" key to start the test. And press
72-0046-03A
0 0D 0 0H 05M 0 3 S
R u n n i n g . P l e a s e v i e w r e s u l t s
S TA T.
ANALYS ANALYS
Fig 23: "PING" results menu
Connected Status
For example:
Table 17: "Real-time Analysis" description
Connected Status
Count
Count
Count of lost messages
Ratio of lost messages
Table 18: "Statistic Analysis" decription
]
Disconnected
Status
Request timed out
Disconnected Status
4 Navigating the Displays
Display
Real-time
Count
None
Count
Count
46