Table of Contents
Advertisement
ADSL2+ Tester
"Results" key to switch to the results menu. The results menu of "TRACE" is very similar
to one of "PING". The results menu includes two parts:
Statistics", as shown in Fig 24.
Re su lt s
[
R OU TE ANA L Y SIS
0 1
0 2
i
RO UTE
ANALYS
In Fig 24, "01" indicates the sequence number of the hop. "218.17.77.1" is the IP address
of this hop and "76ms 56ms 70ms" is the round trip time required to receive an echo
packet from this hop.
Caution:
During one "TRACE" test, the test can not be stopped manually. It will really
take some time to complete the test because of the delay. This can be useful
to have a rough idea of the delay on the link. However, these figures are not
precise enough to be used for performance evaluation.
4.3.5
"MODEM Simulator" results menu
After
making
"MODEM
"Start/Stop" LED is lit green steady and then press "Result" key to switch to "Results"
menu of "MODEM SIMULATOR", as shown in Fig 25.
Re s ult s
[
R A
U p R at e
D ow m Ra t e
U p Rat e MAX
D ow n Rate M AX
i
RATE
72-0046-03A
0 0D 0 0H 0 5M 03 S
21 8 .1 7 .7 7 .1
76 m s 5 6m s 70 m s
21 8 .1 7 .2 5 5 .1 4 7
61 m s 6 3m s 55 m s
Rea dy f or use . P P P UP
HO PS
S TA T.
Fig 24: "TRACE" results menu
SIMULATOR"
0 0D 00 H0 5M 0 3 S
TE]
P le a se v ie w re s ult s. P P P UP
FLUX
Fig 25: "MODEM Simulator" results menu
"Route
]
settings, press
25 6 k by te s / s
9 8 8k b y t e s / s
3 11 kb yt e s /s
1 0 24 kb yt e s /s
4 Navigating the Displays
Analysis" and
"Hops
"Start/Stop"
key
and
47
Advertisement
Table of Contents
