Chapter 3 Installation Of Accessories; Installation Of Accessories Workflow Below - Olympus OER-Elite Installation Manual

Chapter 3
Set up the equipment and ancillary equipment as required while referring to the "System chart" in the
"Instructions-Operation Manual". Also, refer to the instruction manual for the ancillary equipment and
follow the instructions below to install and connect the equipment and ancillary equipment.
3.1

Installation of accessories workflow below

See the installation of accessories workflow below.
Install the grommets.
1
Install the bucking guard.
2
Inspect the mesh filter.
3
Inspect the retaining rack.
4
Install the washing case (MAJ-2121).
5
Install the stylus pen holder.
6
Inspect the accessory holder.
7
OER-Elite INSTALLATION MANUAL
3.1 Installation of accessories workflow below
Installation of Accessories
Section 3.2 on page 38
Section 3.3 on page 39
Section 3.4 on page 40
Section 3.5 on page 41
Section 3.6 on page 42
Section 3.7 on page 43
Section 3.8 on page 44
Ch.3
37