Table of Contents
Advertisement
Quick Links
I n s t r u c t i o n M a n u a l
14ft. Jib Arm with Jib Stand
(P-14-JS)
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by
the applicable copyright statutes or in writing by the publisher.
Advertisement
Table of Contents
Related Manuals for PROAIM 14ft. Jib Arm with Jib Stand
Summary of Contents for PROAIM 14ft. Jib Arm with Jib Stand
- Page 1 I n s t r u c t i o n M a n u a l 14ft. Jib Arm with Jib Stand (P-14-JS) All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the publisher.
- Page 2 Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below. The padded shipping /storage container has been especially designed to protect your purchase while in transit and is a good place to keep your PROAIM 14’ Jib Arm when not in use.
- Page 3 PROAIM 14FT JIB ARM WITH STAND Using the following pictures and text as a guide for set up, please follow the instructions in order of appearance. JIB STAND SET UP For stability and mounting of your 14’ Jib Arm on the stand take out the stand from the case and proceed as follows: ...
- Page 4 PROAIM 14FT JIB ARM WITH STAND CONNECT THE 3RD JIB SECTION TO THE CENTER POST Open the shank from the central post. Leave the black washers at one side. Then insert the end of this section inside the Center Post and align the holes of the section with the central post to screw in the shank.
- Page 5 PROAIM 14FT JIB ARM WITH STAND CONNECTING ARM SECTIONS 3 WITH 2, 2 WITH 1 & 4 WITH 3 The 3rd section has connecting bars attached to both the ends. Slide the bars of section 3 into the slots of section 2 & tighten both the sections together using the provided allen Key.
- Page 6 PROAIM 14FT JIB ARM WITH STAND ADDING THE COUNTER WEIGHTS Securing the counter weights to the Jib is accomplished by the use of the stainless steel shank. It has two lock offs, one for each side of the Arm to...
- Page 7 MOUNTING A MONITOR Provisions for LCD monitor mounting to the Jib Arm are built in. The monitor is not provided. PROAIM 14FT. JIB ARM WITH JIB STAND ALL DRESSED UP AND GOOD TO GO (SHOWN WITH OPTIONAL ACCESSORIES)
- Page 8 PROAIM 14FT JIB ARM WITH STAND WARRANTY We offer a one year warranty for our products from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual.
Need help?
Do you have a question about the 14ft. Jib Arm with Jib Stand and is the answer not in the manual?
Questions and answers