Cisco Nexus 7004 Hardware Installation And Reference Manual page 65

Chapter 3 Installing a Cisco Nexus 7009 Chassis
Figure 3-6
1
Mounting the Chassis by its Center Brackets
To install a Cisco Nexus 7009 chassis by its optional center bracket to a rack or cabinet, follow these
steps:
Follow these steps to replace the front-mount bracket on the chassis with center-mount brackets:
Step 1
a.
OL-23069-07
Attaching the Front of the Cisco Nexus 7009 Chassis to the Rack
Seven to eight M6 x 19 mm or 10-24 x 3/4 in.
Phillips screws used to attach each side
bracket to a front mounting rail (use a total of
eight screws)
Remove the two front-mount brackets from the chassis by unscrewing the five screws that hold each
bracket to the front sides of the chassis (see Figure 3-7).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Chassis
3-15