Cisco Nexus 7004 Hardware Installation And Reference Manual page 23

Chapter 1 Overview
1 Door for the cable management
area
2
System status LEDs
3
Cable management area (upper
routing portion can be removed if
necessary)
4
Rack-mount bracket (2) (one on
each side)
Figure 1-5
1
OL-23069-07
5 Handles used to reposition the chassis (do not lift the chassis with these
handles—use a mechanical lift)
6
I/O or NAM modules (1 to 8 modules in slots 1 to 4 and 7 to 10).
7
Supervisor modules (1 or 2 modules in slots 5 and 6). These modules are of only
one of the following types (if installing two supervisor modules, both modules
must be the same type with the same amount of memory):
Supervisor 1 (N7K-SUP1)
•
• Supervisor 2 (N7K-SUP2)
• Supervisor 2 Enhanced (N7K-SUP2E)
8
Air intake (shown without the optional air filter)
Optional Hardware Features on the Front Side of the Cisco Nexus 7010 Chassis
Mid-frame door assembly 2 Air filter
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Cisco Nexus 7000 Series
1-9