Cisco Nexus 7004 Hardware Installation And Reference Manual page 64

Installing the Chassis
Figure 3-5
1 Push the lower half of the front side of the chassis 3
2 Front-mounting brackets
Make sure that the screw holes in the chassis mounting brackets align with the screw holes in the vertical
Step 4
mounting rails.
To adjust the placement of the chassis so that the screw holes in the chassis mounting brackets align with
Tip
the screw holes in the vertical mounting rails, use the chassis handles shown in
Step 5 Use a Phillips screwdriver to screw in seven to eight M6 x 19-mm or 12-24 x 3/4-inch screws in each of
the two chassis vertical mounting brackets (use a total of 12 to 14 screws for each of two mounting
brackets) as shown in
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
3-14
Moving a Cisco Nexus 7009 Chassis onto a Rack (Front-Mount Installation)
Figure 3-6.
Chapter 3 Installing a Cisco Nexus 7009 Chassis
Rack with vertical mounting rails
Figure 3-6.
OL-23069-07