Cisco Nexus 7004 Hardware Installation And Reference Manual page 28

Nexus 7000 series
Table of Contents

Advertisement

Cisco Nexus 7000 Series
Figure 1-9
1
System status LEDs
2
Rack-mount brackets (2)
3
I/O or NAM modules (1 to 16 in slots 1 to 8 and slots 11 to 18).
4
Supervisor modules (1 or 2 modules in slots 1 and 2). These modules are
of only one of the following types (if installing two supervisor modules,
both modules must be the same type with the same amount of memory):
Supervisor 1 (N7K-SUP1)
Supervisor 2 (N7K-SUP2)
Supervisor 2 Enhanced (N7K-SUP2E)
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
1-14
Standard Hardware Features on the Front and Sides of the Cisco Nexus 7018 Chassis
Chapter 1
5
Air intake for power supply units
6
Air intake for the supervisor modules
and I/O modules
7
Air intake for fabric modules
8
Handles used to reposition the chassis
(do not lift the chassis with these
handles—use a mechanical lift)
Overview
OL-23069-07

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexus 7010Nexus 7009Nexus 7018

Table of Contents