Cisco Nexus 7000 Series
Cisco Nexus 7009 Switch
The Cisco Nexus 7009 chassis has 9 slots that allow for one or two supervisor modules and up to seven
I/O modules. Additionally, the chassis also holds up to five fabric modules, one fan tray, up to two power
supplies, and cable management frames. The chassis also has a front-mount bracket (an alternative
center-mount bracket can be ordered) and four positioning handles (two on each side) that you use to
position the chassis after you place it on a mechanical lift or bottom-support brackets. Optionally, you
can include a door and air intake frame.
Figure 1-2
Figure 1-3
Figure 1-2
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
1-4
identifies the standard features on the front and sides of the Cisco Nexus 7009 chassis, and
identifies the standard features on the rear of the chassis.
Standard Hardware Features on the Front and Sides of the Cisco Nexus 7009 Chassis
Chapter 1
Overview
OL-23069-07