Cisco Nexus 7004 Hardware Installation And Reference Manual page 51

Installing a Cisco Nexus 7009 Chassis
This chapter describes how to install a new or relocated Cisco Nexus 7009 chassis in a rack or cabinet.
For information about installing other Cisco Nexus 7000 Series chassis or power supplies, see the
following chapters:
•
•
•
•
This chapter includes the following sections:
•
•
•
•
•
•
•
Preparing to Install the Switch
This section includes the following topics:
•
•
•
Note You must set up a two- or four-post, 19-inch EIA rack or cabinet before you can install the Cisco Nexus
7009 chassis. Make sure that you order the rack or cabinet and have it delivered before installing the
chassis.
OL-23069-07
Chapter 2, "Installing a Cisco Nexus 7004 Chassis"
Chapter 4, "Installing a Cisco Nexus 7010 Chassis"
Chapter 5, "Installing a Cisco Nexus 7018 Chassis"
Chapter 6, "Installing Power Supplies"
Preparing to Install the Switch, page 3-1
Installing the Bottom-Support Rails on the Rack, page 3-4
Installing the Chassis, page 3-11
Grounding the Cisco Nexus 7009 Chassis, page 3-19
Installing the Cable Management Frames, page 3-24
Installing the Front Door and Air Intake Frame, page 3-27
Installing Storage Media in a Supervisor Module, page 3-35
Required Tools, page 3-2
Installing a Rack or Cabinet, page 3-2
Unpacking and Inspecting a New Switch, page 3-3
C H A P T E R
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
3
3-1