Cisco Nexus 7000 Series
Cisco Nexus 7010 System
The Cisco Nexus 7010 chassis has 10 slots that allow for two supervisor modules and up to eight I/O
modules. Additionally, the chassis holds up to five fabric modules, two system fan trays, two fabric fan
trays, up to three power supplies, and cable management frames. The chassis also has mounting brackets
and four positioning handles (two on each side) that you use to install the chassis after you position it
on a rack. Optionally, you can include an air filter and mid-frame doors.
Figure 1-4
Figure 1-5
standard features on the rear of the chassis.
Figure 1-4
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
1-8
identifies the standard features on the front and sides of the Cisco Nexus 7010 chassis,
identifies the optional features on the front side of the chassis, and
Standard Hardware Features on the Front and Sides of the Cisco Nexus 7010 Chassis
Chapter 1
Overview
Figure 1-6
identifies the
OL-23069-07