Graco LineLazer ES 1000 Operation - Repair - Parts page 6

Airless line striper, for the application of line striping materials, maximum operating pressure: 3300 psi 22.8 mpa, 228 bar
Hide thumbs Also See for LineLazer ES 1000:
Table of Contents

Advertisement

Warnings
PERSONAL PROTECTIVE EQUIPMENT
Wear appropriate protective equipment when in the work area to help prevent serious injury, including eye
injury, hearing loss, inhalation of toxic fumes, and burns. This protective equipment includes but is not limited
to:
Protective eyewear, and hearing protection.
Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.
BATTERY HAZARD
The battery may leak, explode, cause burns, or cause an explosion if mishandled. Contents of an open bat-
tery can cause severe irritation and/or chemical burns. If on skin, wash with soap and water. If in eyes, flush
with water for at least 15 minutes and get immediate medical attention.
Only use the battery type specified for use with the equipment. See Technical Data.
Connecting cables to the battery creates sparks. Replace battery only in well-ventilated area and away
from flammable or combustible materials, including paints and solvents.
Remove watches, rings or other metal objects before servicing.
Only use tools with insulated handles. Do not lay tools or metal parts on top of battery.
Do not dispose of battery in fire or heat above 50°C (122°F). The battery is capable of exploding.
Do not throw into fire.
Do not expose battery to water or rain.
Do not disassemble, crush, or penetrate the battery.
Do not use or charge a battery that is cracked or damaged.
Follow local ordinances and/or regulations for disposal.
CALIFORNIA PROPOSITION 65
This product contains a chemical known to the State of California to cause cancer, birth defects or other
reproductive harm. Wash hands after handling.
6
3A4603C Operation, Repair, Parts

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents