Omron F3SG-*RR Series Quick Installation Manual page 13

Setting
5. (For Intermediate Bracket) Securely tighten the Mounting Screw. Tightening torque: 3.0 N•m (recom-
mended) Then loosen the Alignment Screw.
6. Secure the Top/Bottom Brackets to the wall.
7. Perform beam alignment according to the indicators.
Then securely tighten the Alignment Screws. Tightening torque: 3.0 N•m (recommended)
- The angle adjustment range is ±22.5° when using the Top/Bottom Brackets only.
- The angle adjustment range is ±15° when using the Top/Bottom Brackets and Intermediate Bracket together.
F3SG-RR
Quick Installation Manual
Wiring
Mounting Screw
Alignment Screw
(hexagon socket head
cap screw (M4×22))
Mounting Screw
Alignment Screw
<Backside mounting>
M5/M6 M5/M6
<Receiver>
TOP(Blue)
RECEIVER
STB(Green)
BTM(Blue)
Mounting/Beam Alignment
(1)
(2)
<Side mounting>
Alignment Screws
(Top/Bottom Bracket)
Alignment Screws
(Top/Bottom
Bracket)
Operation check
Alignment Screws
(Intermediate
Bracket)
Step1
Check
position
Step2
Mount
Step3
Align
beams
12