Samsung CLP-510 Series Setup Manual page 99

4.8
P T
RINTING ASKS
Property
Make sure that Source is set to the
Source
3
corresponding paper tray.
Use the Manual source when printing to
special material. You have to load one sheet
at a time into the Multi-purpose Tray. See
page 3.9.
If the paper source is set to Auto Select,
the printer automatically picks up print
material in the following order: Multi-purpose
Tray, Tray1, Optional Tray2.
Make sure that Type is set to Plain Paper.
4 Type
If you load a different type of print material,
select the corresponding paper type. For
more information on print material, refer to
Chapter 3, "Using Print Materials."
If you use 16lb to 24lb (60~90g/m
paper, such as Gilbert 25% and Gilbert 100%,
set the paper type to Cotton for best
printing.
To use recycled paper, select Recycled
Paper.
This property allows you to print the first
Different
5
page using a different paper type from the
Source for
rest of the document. You can select the
First Page
paper source for the first page.
For example, load thick stock for the first
page into the Multi-purpose Tray, and plain
paper into Tray1. Then, select Tray1 in the
Source option and MP Tray in the
Different Source for First Page option.
Scaling allows you to automatically or
Scaling
6
manually scale your printer job on a page.
You can choose from None, Scale Printing,
and Fit to Page. For details, see page 5.4
and page 5.5.
Description
2
) cotton