Static Addressing - Samsung CLP-510 Series Setup Manual

C.8
U Y P
SING OUR RINTER ON A
Configuring TCP/IP
Your printer can be set up on a variety of TCP/IP networks. There
are several ways in which your printer can be assigned a TCP/IP
address, depending on your network.
• Static Addressing: TCP/IP address is assigned manually by
the system administrator.
• Dynamic Addressing BOOTP/DHCP (default): TCP/IP address
is assigned automatically by the server.

Static Addressing

To enter the TCP/IP address from your printer's control panel,
take the following steps:
1
In ready mode, press the Menu button (
"Network" on the bottom line of the display. Press the Enter
button ( ) to access the menu.
2
Press the Enter button (
displays on the bottom line.
3
Press the scroll button (
press the Enter button (
4
Press the Upper Level button (
button ( ).
5
Press the Enter button (
6
Press the scroll button (
press the Enter button (
7
Press the Upper Level button (
button ( ).
8
Press the Enter button (
displays.
9
Press the scroll button (
and press the Enter button (
10
Press the Upper Level button (
button ( ).
11
Press the Enter button (
menu.
N
ETWORK
) until you see
) when "Config Network"
or ) until "Yes" displays, and
).
), then use the scroll
) when "Config TCP" displays.
or ) until "Yes" displays, and
).
), then use the scroll
) when "IP Get Method"
or ) until "Static" displays,
).
), then use the scroll
) to access the IP Address